Lighting Your Way with an Incredibly Simple Solution
Building Energy Management System: Simple to Design, Install, Use & Adapt.
Okay, so EMS™ is an incredibly smart way to achieve optimal control and energy savings in your commercial building. But how easy it is to actually put it into action? It’s incredibly simple!
Simple to Design: EMS™ utilizes a Ballast Module (BMO) that connects to standard lighting components such as low voltage non-dimming ballasts and LED drivers and a Sensor Module (SMI) which connects to occupancy sensors or photo sensors. EMS is able to utilize such standard lighting components to make the specification process simpler, and the components considerably more affordable. Software-based zone configuration is independent of lighting circuits or switch legs making design and specification easier.
Simple to Install: Ballast and Sensor modules are installed in a daisy chain wiring topology utilizing 18 AWG cable with 2-pin connectors. Connection to a fixture or sensor is as easy as “click and go” for the installer with no pre-addressing required. (Addressing of each device is performed by software association at the commissioning stage.)
Simple to Use: Central control software enables facility managers to control each fixture in a building either from their desktop PC or remotely via the Internet. Easy to use floorplan based software allows for simple navigation and system configuration.
Simple to Adapt: Since each light fixture and sensor in a building may be controlled individually, system reconfiguration due to changes in workspace use or tenant construction is done entirely through the EMS software. Association of fixtures to zones can be changed by a simple “drag and drop” procedure without ever having to physically re-wire or move hardware again. Finally, a building energy management system that just makes sense.